Amore Paris
Bague ORSAY
Bague ORSAY
Ring Size Guide
Wrap a thin strip of paper or string around the base of your finger, where the ring will sit. Mark the point where it overlaps, then measure the length in millimetres with a ruler — this is your finger circumference. Match it to the chart below.
Tip: measure at the end of the day, when fingers are naturally slightly larger.
Fit advice: Due to the substantial width and sculptural design of our rings, they tend to fit more snugly than traditional slim bands. We recommend selecting approximately half to one size larger than your usual ring size for the most comfortable fit. If your measurement falls between two sizes, we suggest choosing the larger size.
| EU | Circumference (mm) | US | UK |
|---|---|---|---|
| 50 | 50 | 5¼ | J½ |
| 52 | 52 | 6 | L |
| 54 | 54 | 6¾ | M½ |
| 56 | 56 | 7½ | O¼ |
| 58 | 58 | 8¼ | Q |
International size conversions are approximate and may vary slightly between manufacturers. For this style, we generally recommend choosing half to one size larger than your usual ring size.
Impossible de charger la disponibilité du service de retrait
Estimated Shipping Widget will be displayed here!
Détails :
- argent sterling 925
- plaqué or 18 carats
- oxyde de zirconium
- fabriqué en Italie
- bague maille
Nos pièces sont faites pour durer grâce à notre processus de placage de haute qualité, entièrement réalisé en Italie. Chaque détail est soigneusement travaillé pour garantir d'excellents résultats esthétiques, mais aussi une durabilité supérieure dans le temps.
Entretien du produit
Entretien du produit
• Retirer avant de prendre une douche, de nager ou de faire de l'exercice
• Éviter tout contact avec les parfums, les lotions et les huiles
• Ne pas exposer à l'eau chlorée ou salée
• Ranger séparément dans la pochette d'origine pour éviter les rayures
• Nettoyer délicatement avec un chiffon doux et sec après chaque utilisation
Le placage or s'use naturellement avec le temps en cas d'utilisation fréquente ou d'exposition à des agents extérieurs. Ceci n'est pas considéré comme un défaut de fabrication.
